Ultraplan Contract
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 10 mm.
Where to use
Ultraplan is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing substrates, preparing them to receive all kinds of flooring where a high resistance to loads and traffic is required. Ultraplan is especially suitable for areas subject to wheeled chairs. Ultraplan is for interior use only.
TECHNICAL CHARACTERISTICS
Ultraplan is a pinkish-grey powder consisting of special cements with rapid setting and hydration, with selected graded silica sand, resins and special admixtures prepared according to a formula developed in the MAPEI Research laboratories. Mixed with water, Ultraplan becomes a fluid and easily workable mortar, perfectly self-levelling, with high bonding strength to the substrate and ultra-fast drying. Ultraplan can be applied with an automatic pressure pump for distances over 100 m. Ultraplan can be spread in thicknesses up to 10 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength as well as resistance to indentation and abrasion. For thicknesses greater than 10 mm (max. 20 mm), it is recommended to add approx. 30% by weight of 0.4-0.8 mm quartz. Installation of flooring can begin approx. 12 hours after the application of Ultraplan, regardless of thickness.
Where to use
Ultraplan is used in interiors for levelling and smoothing differences in thicknesses from 1 to 10 mm on new or existing substrates, preparing them to receive all kinds of flooring where a high resistance to loads and traffic is required. Ultraplan is especially suitable for areas subject to wheeled chairs. Ultraplan is for interior use only.
TECHNICAL CHARACTERISTICS
Ultraplan is a pinkish-grey powder consisting of special cements with rapid setting and hydration, with selected graded silica sand, resins and special admixtures prepared according to a formula developed in the MAPEI Research laboratories. Mixed with water, Ultraplan becomes a fluid and easily workable mortar, perfectly self-levelling, with high bonding strength to the substrate and ultra-fast drying. Ultraplan can be applied with an automatic pressure pump for distances over 100 m. Ultraplan can be spread in thicknesses up to 10 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength as well as resistance to indentation and abrasion. For thicknesses greater than 10 mm (max. 20 mm), it is recommended to add approx. 30% by weight of 0.4-0.8 mm quartz. Installation of flooring can begin approx. 12 hours after the application of Ultraplan, regardless of thickness.
